For the startup method of the car monitor, there are
three common methods in the factory menu of the driving car monitor, namely “Power
on and start up”, “Manual startup”, “ Memory startup”.
The menu needs to be opened by quickly pressing the “up”, “down”, “left”, “right”, “ middle” button of
the remote control while the car monitor is in standby mode.
1. Power on and start up (the machine will automatically start up after power on)
After setting "POWER" to "ON" in the factory menu, the display
screen will automatically turn on after disconnecting the power and then
turning it on again.
2. Manual startup
After setting "POWER" to "OFF" in the factory menu, turning on
the display screen after disconnecting the power requires manually pressing the
power button on the car monitor to turn it on.
3. Memory startup (remember the state of the last power outage)
After setting "POWER" to "SAVE" in the factory menu, the display
screen will automatically remember the status of the last power outage, and
when powered on again, it will display the status of the last power on or off.
Overall, Car monitor have three ways to turn on the car monitor screen through the factory menu: “Power
on and start up”, “Manual startup”, “ Memory startup”. Different startup methods are suitable for
different scenarios and needs, and can choose according to driver needs and
habits. In the future, with the development of and technological progress,
believed that the Startup method of car monitor will also become increasingly intelligent.